The CUA31 Control Unit Adapter converts the PM-IF interface to a DRIVE-CLiQ interface. The CUA31 Control Unit Adapter allows Power Modules in blocksize format to operate on a Control Unit, e.g. as a single axis next to a multi-axis drive. In this case, the CUA31 Control Unit Adapter must be the last device in the DRIVE-CLiQ link from the viewpoint of the Control Unit.
The CUA31 Control Unit Adapter features the following connections and interfaces:
1 temperature sensor input for KTY84130, Pt1000 or PTC (Pt1000 can be used from firmware V4.7 HF17)
3 DRIVE-CLiQ sockets
1 connection for the electronics power supply via the 24 V DC supply connector
SINAMICS SMC30 Sensor Module For incremental encoder: TTL/HTL or combi-encoder SSI with incremental tracks or encoder SSI without incremental signals/ without DRIVE-CLiQ cable 30 mm overall width
The SIMOTION D425-2, D435-2, D445-2 and D455-2 Control Units feature PLC and Motion Control performance (open-loop control and Motion Control) for up to 16, 32, 64 or 128 axes, as required.
The integrated drive control enables each D4x5-2 Control Unit to operate up to 6 servo, 6 vector or 12 V/f axes.
The integrated drive control is based on the drive control of a SINAMICS S120 CU320-2 Control Unit (firmware version V4.x/V5.x) and supports servo control (for a highly dynamic response), vector control (for maximum torque accuracy) and V/f control.
Typical applications include:
Compact multi-axis machines
High-performance applications with short machine cycles
Compact machines
Including the complete machine control in the drive
With extensive connection possibilities for communication, HMI and I/O
Distributed drive concepts
Applications with a many axes
Synchronization of several SIMOTION D Control Units using distributed synchronous operation
The SIMOTION D410-2 handles the Motion Control, technology and PLC functions associated with a single axis and is also responsible for the drive control of that axis. The integrated inputs/outputs support up to 8 high-speed cam outputs or 8 measuring inputs.
SIMOTION D410-2 is the ideal solution when Motion Control for one axis and PLC functionality are required in compact format. However, it can also be used for small multi-axis groupings with typically 2 to 3 axes (max. 8 axes) in blocksize format. With these applications, the SINAMICS Control Units are connected to the SIMOTION D410-2 via PROFINET or PROFIBUS..
Examples of SIMOTION D410???2 applications include:
CU FOR PM340/PM240-2 WITH INTERFACE FOR INCREMENTAL ENCODER HTL/TTL
Height
165.8mm
Width
73mm
Depth
37.3mm
The CUA32 Control Unit Adapter converts the PM-IF interface to a DRIVE-CLiQ interface. The CUA32 Control Unit Adapter is also equipped with an integral encoder evaluation device which can be configured for an HTL/TTL or SSI encoder. The CUA32 Control Unit Adapter allows Power Modules in blocksize format to operate on a Control Unit, e.g. as a single axis next to a multi-axis drive. In this case, the CUA32 Control Unit Adapter must be the last device in the DRIVE-CLiQ link from the viewpoint of the Control Unit.
The CUA32 Control Unit Adapter features the following connections and interfaces:
1 temperature sensor input for KTY84 130, Pt1000 or PTC (Pt1000 can be used from firmware V4.7 HF17)
3 DRIVE-CLiQ sockets
1 connection for the electronics power supply via the 24 V DC power supply connector
1 Safe Stop input
1 encoder evaluator for
Incremental encoder TTL/HTL
SSI encoder without incremental signals
The status of the CUA32 Control Unit Adapter is indicated via multi-color LEDs.
The SIMOTION D425-2, D435-2, D445-2 and D455-2 Control Units feature PLC and Motion Control performance (open-loop control and Motion Control) for up to 16, 32, 64 or 128 axes, as required.
The integrated drive control enables each D4x5-2 Control Unit to operate up to 6 servo, 6 vector or 12 V/f axes.
The integrated drive control is based on the drive control of a SINAMICS S120 CU320-2 Control Unit (firmware version V4.x/V5.x) and supports servo control (for a highly dynamic response), vector control (for maximum torque accuracy) and V/f control.
Typical applications include:
Compact multi-axis machines
High-performance applications with short machine cycles
Compact machines
Including the complete machine control in the drive
With extensive connection possibilities for communication, HMI and I/O
Distributed drive concepts
Applications with a many axes
Synchronization of several SIMOTION D Control Units using distributed synchronous operation
The SIMOTION D410-2 handles the Motion Control, technology and PLC functions associated with a single axis and is also responsible for the drive control of that axis. The integrated inputs/outputs support up to 8 high-speed cam outputs or 8 measuring inputs.
SIMOTION D410-2 is the ideal solution when Motion Control for one axis and PLC functionality are required in compact format. However, it can also be used for small multi-axis groupings with typically 2 to 3 axes (max. 8 axes) in blocksize format. With these applications, the SINAMICS Control Units are connected to the SIMOTION D410-2 via PROFINET or PROFIBUS..
We are offering AC Servo Drive S120 to our client.
SINAMICS S120 modular motion control drives are designed for high performance drive applications in mechanical and systems engineering. With Siemens high performance drive capabilities, you get a range of coordinated components and functions as a complete motion control drives package. Our motion control drives include high-performance single drives and coordinated drives (multiple-axis applications) with vector or servo functionalities hat allow implementation of customized high performance drive solutions.With SINAMICS S120 motion control drives, you get a high performance drive that is flexible and increases productivity. In addition to an innovative system architecture and digital communication options, our motion control drives provide efficient engineering and quick commissioning resulting from innovative tools and simple wiring. The motion control drives in the SINAMICS S120 high performance drive range deliver performance from 0.12 to 4,500 kW and come in a variety of designs and cooling types.
The SIMOTION D425-2, D435-2, D445-2 and D455-2 Control Units feature PLC and Motion Control performance (open-loop control and Motion Control) for up to 16, 32, 64 or 128 axes, as required.
The integrated drive control enables each D4x5-2 Control Unit to operate up to 6 servo, 6 vector or 12 V/f axes.
The integrated drive control is based on the drive control of a SINAMICS S120 CU320-2 Control Unit (firmware version V4.x/V5.x) and supports servo control (for a highly dynamic response), vector control (for maximum torque accuracy) and V/f control.
Typical applications include:
Compact multi-axis machines
High-performance applications with short machine cycles
Compact machines
Including the complete machine control in the drive
With extensive connection possibilities for communication, HMI and I/O
Distributed drive concepts
Applications with a many axes
Synchronization of several SIMOTION D Control Units using distributed synchronous operation
